Marathon Sprint Series Instruções de Operação descarregar pdf (Página 26)

Functions and Connections marathon

Trolley board

Terminal 1 Power supply to chain

2 Power supply to rail

3 + 4 End switch gate OPEN

5 Motor cable

6 Motor cable

7 + 8 End switch gate CLOSED

Connecting push-button 1

Use the contact only for potential-free normally closed contacts.

External voltage may damage or even destroy the control unit.

Factory settings: The push-button cable is connected to push-button 1.

Terminal 2 + 3 Push-button 1 connection

Connecting push-button 2

Use the contact only for potential-free normally closed contacts.

External voltage may damage or even destroy the control unit.

Connect push-button 2 if the functions described below are required.

Terminal 4 + 5 Connection push-button 2

Push-button 2 is needed for defined opening and closing or partial opening

function.

SOM

SOMMER

M550-800

M1000

Connecting light barrier 1

Supplied as standard with jumper.

Terminals 6 + 7 tested connection for floating contacts,

only if DIP switch 2 is OFF

Terminals 10 + 11 regulated 24 V/DC, max. 0.1 A

Terminal 10: 24 V/DC

Terminal 11: Earth

Settings: see Obstacle Recognition (DIP 1, 2 + 3)

Connecting the 8.2 kOhm bar

Supplied as standard with jumper.

Analysis 8.2 Kohm; connection without special analyser.

Terminal 6 + 7 Tested connection for a 8.2 Kohm resistance,

DIP switch 2 OFF

Terminal 6: + (brown)

Terminal 7: Earth (white or blue)

Settings: see Obstacle Recognition (DIP 1, 2 + 3)

Connecting light barrier 2

Supplied as standard with jumper.

Terminal 8 + 9 Tested connection for floating contacts,

only reacts if door is open

Terminal 10 + 11 regulated 24 V/DC, max. 0.1 A

Terminal 10: V/DC 24 V

Terminal 11: Earth

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comentários a estes Manuais

Sem comentários

Marathon Sprint Series Instruções de Operação Página 26

Comentários a estes Manuais